0 items

view cart

Questions? Call 1-888-THAT-PET
Shop By Category

    Aqueon Pro Heater 200 - 200W - Up to 75 gal.


    Item # 249135 / Manufacturer Part # 06108

    Was $39.99
    Now $30.51
    Do your glass heaters keep on breaking due to aggressive fish? Try Aqueon's new Pro Heaters! Durable polymer exterior with aluminum core is shatterproof. No glass components. Will withstand any abuse your fish can dish out. Electronic thermostat for accurate temperature control to +/- 1 degree F. Auto shut-off when run dry. Restarts automatically when submerged. Fully submersible. Includes suction cups and 6 ft. cord. Indicator light turns red for heating and green for when the temp is set.

    Up to 75 gallon aquariums
    Temperature Range68 to 88 degrees F.
    Power Cord Length6 ft.
    UL ListedYes

    Step 1: Attach suction cups to heater. Attaching both suction cups will ensure proper positioning in your aquarium and will allow adequate water circulation around the heater for even heat distribution. Suction cups should only be placed over label portion of the heater. Note: Do not place suction cups over the heating element portion of the heater.
    Step 2: Set heater temperature. In order to set the temperature, turn the adjustent knob to the required temperature value stated on the graduated scale, located on the top of the heater.
    Step 3: Install heater in water filled aquarium. The heater works best when installed in the vertical position. The installation of the heater in this position requires that the aquarium must maintain a level above the minimum water level line on the heater. The heater can be installed in the horizontal position. The installation of the heater in this position requires that it be fully submerged at all times.
    Step 4: Plug into electrical outlet. Allow for heater to be submerged in water for a minimum of 30 minutes prior to powering the appliance. Once plugged in, the heater will automatically start working. Should your water need heat, the indicator lamp will illuminate showing that the heater is functioning and in heating mode.
    Step 5: Allow the heater to run for 24 hours at the original setting prior to adjusting. Check the aquarium water with a reliable thermometer. Should the heater need adjusted, simply turn the adjustment knob to the appropriate setting.

    Average Rating

    Aqueon Pro Heater 3/25/2014

    Reviewer: Freedom

    Very happy with this heater. Having a light which tells both when it is running (temp is low) and when temperature is accurate and it is off, is a great tool for the hobbyist.

    Aqueon Pro Heater 2/27/2014

    Reviewer: Silvia

    Absolutely love these heaters. They look so nice in the tank and they keep the right temperature. I have 5 tanks and have these in every tank and never had a problem.

    Aqueon 200w heater 1/10/2014

    Reviewer: chris

    The simplest to use and holds temp. right on. I have 2, but only used one. Saving one for backup like I do with most aquarium items...

    Great Heater 2/28/2013

    Reviewer: Pigeoncover

    I have two and they work well. they hold a consistent temperature and have been trouble free. Great heaters!

    Related Items
    SmartTemp Thermometer

    SmartTemp Thermometer