Kent Superbuffer-dKH is a specially formulated pH buffer and alkalinity or carbonate hardness (KH) builder, designed to adjust the pH of saltwater aquariums to the range of 8.0 to 8.3 and build the KH. Superbuffer-dKH is the finest buffer available for either fish only or reef type marine aquariums and is designed to mix clear with little or no cloudiness or precipitation. Will not flake on your corals as other competing products can Compatible with and designed for use with Kalkwasser Mix, Concentrated Liquid Calcium, or Turbo-Calcium by Kent Marine.
Dissolve one teaspoon of KENT Marine Superbuffer-dKH in a glass of fresh water • Add directly to a tank or sump for each 20-30 gallons (80 liters) of tank capacity each day until the desired pH and alkalinity (carbonate hardness or KH) are reached • Wait 1 hour to re-measure alkalinity and wait 24 hours to re-measure pH levels (full pH increase and stabilization may take up to 48 hours!) • After target pH and alkalinity are reached, use at 2 week intervals to maintain values.
If you are having trouble maintaining calcium or buffer levels, check to see that the salt mix you are using contains natural seawater levels of magnesium. Magnesium is necessary and low levels result in poor calcium solubility and buffering.
Use KENT Marine Kalkwasser, KENT Marine Liquid Calcium, KENT Marine Liquid Calcium Reactor, or KENT Marine Turbo-Calcium to build and maintain calcium levels in marine and reef systems.
Contains carbonate, bicarbonate, and borate salts.