• Home
  • Seachem PhosNet - 4.4 oz.

Seachem PhosNet - 4.4 oz.

(0) No Reviews yet
Item: 271546

In Stock

Available: 16

Seachem's PhosNet uses granular ferric oxide to quickly and effective remove phosphate and silicate from your fresh or saltwater aquarium! Meticulously designed with larger binding capacity and porous surface area, PhosNet removes the dissolved impurities from your aquarium that cause unsightly algae growth! The high structural integrity of the filter media also ensures it will not breakdown under flow of water. Perfect for use in all aquarium filters, including power filters, canister filters and wet/dry filters and sumps.

Visit our Pet Blogs for fun articles and information about all of your favorite pets!
Internal Id
Granular ferric oxide.
For best results, PhosNet should be rinsed before use and placed so as to maximize the flow of water through it but not so that it tumbles against itself in flow. It may be used in a canister filter, media chamber, box filter, or any high flow area of a trickle filter. Use of a filter bag is recommended.

Use 50 g (½ cup) for every 200 L (50 US gallons) saltwater or 400 L (100 US gallons) freshwater. Leave product in place for 4 days, then test phosphate or silicate concentrations with either MultiTest® Phosphate or MultiTest® Silicate. If the concentration of the component you are trying to decrease has not dropped to around 0.02 mg/L, then replace the PhosNet™, otherwise leave in place until levels begin to climb again. As long as concentrations remain under control, the product is not exhausted. Over treating is not recommended. PhosNet™ is not an exchange resin and does not release anything into the water. It does not leach phosphate or silicate back into the water and may be removed, dried, and returned to service until exhausted. Continuous use of small quantities is better than intermittent use of larger quantities.

Ratings & Reviews

No reviews available

Be the first to Write a Review