Seachem - Strontium - 250 mL
$5.99
SKU: 296195
Manufacturer: Seachem
MPN: 375
Shop in Retail Store
Ship to Home
Ship to Lancaster, Pa Store
Details
Reef Strontium is intended to restore and maintain strontium to levels found in natural seawater without affecting pH. Strontium is utilized in the same manner as calcium and holds a similar importance in maintaining a vigorous level of growth.
Ingredients
Ingredients: strontium gluconate
Strontium (Sr) 10mg/g
Strontium (Sr) 10mg/g
Instructions
Beginner
Use 1 capful (5 mL) per 80 L (20 US gallons) twice a week.
Advanced
Check strontium level (use Reef Status Strontium to test strontium levels), then follow addition regimen above until strontium is adjusted to 8–12 mg/L. Each 5 mL/80 L will raise strontium by about 0.6 mg/L. Quantity or frequency can be adjusted as required to maintain strontium.
Expert
After determining the strontium consumption rate, set up a continuous drip system. Use the following formula (or skip the math and use our Dosage Calculator) to determine how much to add to your top-off water: m=0.1vs (m=mL of product to add to top off water, v=volume of tank in liters, s=amount to raise strontium in mg/L). For example, if you want to raise strontium by 2 mg/L in a 200 liter tank, then you would add 0.1x200x2=40 mL into the top-off water. [For reference: 1 gallon=3.8 L].
Use 1 capful (5 mL) per 80 L (20 US gallons) twice a week.
Advanced
Check strontium level (use Reef Status Strontium to test strontium levels), then follow addition regimen above until strontium is adjusted to 8–12 mg/L. Each 5 mL/80 L will raise strontium by about 0.6 mg/L. Quantity or frequency can be adjusted as required to maintain strontium.
Expert
After determining the strontium consumption rate, set up a continuous drip system. Use the following formula (or skip the math and use our Dosage Calculator) to determine how much to add to your top-off water: m=0.1vs (m=mL of product to add to top off water, v=volume of tank in liters, s=amount to raise strontium in mg/L). For example, if you want to raise strontium by 2 mg/L in a 200 liter tank, then you would add 0.1x200x2=40 mL into the top-off water. [For reference: 1 gallon=3.8 L].